Brass and Bronze

Brass
Brass is an alloy of copper and zinc, in proportions which can be varied to achieve varying mechanical and electrical properties. It is a substitutional alloy: atoms of the two constituents may replace each other within the same crystal structure.

Bronze
Bronze is an alloy consisting primarily of copper, commonly with about 12–12.5% tin and often with the addition of other metals and sometimes non-metals or metalloids such as arsenic, phosphorus or silicon. These additions produce a range of alloys that may be harder than copper alone, or have other useful properties, such as strength, ductility, or machinability.

we cast below brass and bronze

Bronze alloy	American Spec	ISO	EU	German Spec	British Spec
Leaded Red Brass	C83600	CuPb5Sn5Zn5		CuSn5ZnPb	LG2
Manganese Bronze	C86300	CuZn25Al6Fe3Mn3	EN CC762S(CuZn25Al5Mn4Fe3-C)	G-CuZn25Al15	HTB-3
Silicon brass	C87400			CuZn15Si4
Tin Bronze	C90700	CuSn10p		CuSn12	PB4
High Tin Bronze	C90500	CuSn10Z2		CuSn10Zn	G1
High Tin Bronze/Gear Bronze	C90800	CuSn12	EN CC483K( CuSn12-C)
Nickel-Phosphorus Gear Bronze	C92500		EN CC482K (CuSn11Pb2-C )	CuSn12Ni	CT2
Leaded Tin Bronze	C93200	CuSn7Zn4Pb7-C	EN CC493K (CuSn7Zn4Pb7-C)	CuSn7ZnPb
High-Leaded Tin Bronze	C93700	CuPb10Sn10		CuPb10Sn	LB2
Aluminium Bronze	C95200	CuAl10Fe3		CuAl10Fe	AB1
Aluminium Bronze	C95500		EN CC333G(CuAl10Fe5Ni5-C)	CuAI10Ni	-
Nickel Aluminum Bronze	C95800			CuAl10Ni	AB2
We can cast other bronze alloy according to chemical composition requested

Previous：AS 3996 Classification of Access Covers and Grates

Next：BS EN 124 classification & groups